Hi, what are you looking for?
Ukraine Gets Support From CleanTechnica — How About Some More?
Sanofi Plans 3,000 Solar Panels, An EV Fleet, And In-House Charging At Brisbane Manufacturing Campus
BLUETTI Users Always Get More Than Power for Off-Grid Living
LLNL’s Energy Flow Diagrams Show That The US Isn’t Moving The Needle On Climate Action
NeedEnergy Launches Its First Project As It Moves To Get Zimbabwe Closer To The Grid Edge
Ukraine Gets Support From CleanTechnica — How About Some More?
LLNL’s Energy Flow Diagrams Show That The US Isn’t Moving The Needle On Climate Action
The Top 20 NREL Stories Of 2022
US Army Tests A New Flow Battery From Lockheed Martin
Fossil Fuel Industry Plans To Hijack Offshore Wind In Gulf Of Mexico
Globeleq Signs Financing Agreement On $108M Menengai Geothermal Project In Kenya
Witness The Other Side Of Geothermal Energy In “The Volcano”
Dandelion Energy Ready To Expand Ground Source Heat Pumps
Deep Geothermal — One Renewable Energy Source To Rule Them All?
Clean Energy Supply Chain Analyses
The Top 20 NREL Stories Of 2022
Harvest Thermal Delivers CO2-Based Heat Pumps With Thermal Storage To Arbitrage Electricity Rates
US Army Tests A New Flow Battery From Lockheed Martin
Battery Manufacturing Is Creating Lots & Lots & Lots Of Jobs
Tesla Model 3 Stats at 80,000 Miles, Heat Pump Water Heaters — Top 30 CleanTechnica Stories in 2022
Vehicle-To-Grid Solutions Could Open Fast Lane To Net-Zero Future
From Hyundai Kona EV to Tesla Model Y Standard Range
USA’s 1st Vehicle-To-Grid Export Rate For Commercial Electric Vehicles
Shyft Group Shows Off Its Blue Arc Electric Last Mile Delivery Vehicle To Customers
Volvo EX90 Will Feature App-Based AC & DC Bi-Directional Charging
LLNL’s Energy Flow Diagrams Show That The US Isn’t Moving The Needle On Climate Action
We Need Trailer & Camper Manufacturers To Publish Data On EV Range Impacts
The Top 20 NREL Stories Of 2022
Harvest Thermal Delivers CO2-Based Heat Pumps With Thermal Storage To Arbitrage Electricity Rates
Tesla Model 3 Stats at 80,000 Miles, Heat Pump Water Heaters — Top 30 CleanTechnica Stories in 2022
Tesla Semi Details Revealed In Parts Catalog Diagrams
Discrimination At The Pump? No Love For EV Drivers?
Sanofi Plans 3,000 Solar Panels, An EV Fleet, And In-House Charging At Brisbane Manufacturing Campus
Ravensbourne Escape, High Country Touring — Electric Vehicle Style
Where Will Tesla’s Next Gigafactory Location Be?
Renault Megane E-Tech Electric Review — 1st Impressions
Volvo C40 Recharge Review — 1st Impressions
MG5 Station Wagon EV Long Range Review — 1st Impressions
A Tale Of Two E-Bikes
CleanTechnica Tested: The Rad Power Bikes RadTrike
XPeng & NIO See Similar Sales Growth In 2022, Flip-Flopped Q4 Trends
8 Charts Showing Tesla’s Fast Continued Sales Growth
Norway’s EV Sales Explode Ahead Of Policy Changes
Top EV Brands In The World
100% Electric Vehicles Now 13% Of New Vehicle Sales Globally!
Renault Megane E-Tech Electric Review — 1st Impressions
Volvo C40 Recharge Review — 1st Impressions
MG5 Station Wagon EV Long Range Review — 1st Impressions
A Tale Of Two E-Bikes
CleanTechnica Tested: The Rad Power Bikes RadTrike
Sandy Munro: The Coming Wave of Chinese EVs
Sandy Munro On Which Automakers Are Getting It Right Besides Tesla
Sandy Munro: How Tesla Gets To The $24,000 Car
Sandy Munro: Tesla Is “Engineering At The Speed Of Thought”
Video: 2023 Kia Niro Plug-In Hybrid SX Touring Review
Canadian auto parts suppliers are putting their sustainability skills on display with the Project Arrow electric car featuring a 3D-printed chassis.
By
Published
The dream of an entire 3D-printed electric car is somewhere off in the future, but 3D printing has been steadily worming its way into the auto parts field. Everyone is elbowing for a piece of the action, including Canadian auto parts suppliers. They are looking to break out of the pack with Project Arrow, a new electric car featuring a chassis fully functional 3D-printed chassis.
Project Arrow is a concept car, but more likely than not some of those parts will end up in your next electric car as the global auto industry pivots into new technology.
Canada is unlikely to be the first country to pop up in a conversation about electric car parts or 3D printing, but Project Arrow could change that.
The new electric car is a concept showcase for the Canadian trade organization, the Automotive Parts Manufacturers’ Association. They launched the program in the summer of 2020 with a design competition, focusing on parts from Canadian companies.
Project Arrow moved along at a rapid clip last year with plans for an official unveiling at CES 2023 in Las Vegas, Nevada, and all is going according to plan. According to various reports the finishing touches were still being applied into December, but the fully functional, driveable electric car will be ready for display at CES on January 5, sporting a 3D-printed chassis from the proudly Canadian company Xaba,
CleanTechnica was reminded of the all-Canadian angle by a representative from Xaba, who reached out by email with a reminder that Project Arrow is “the first car to be made from all-Canadian intellectual property.”
“The material used and the production process also makes it the first-ever fully sustainable vehicle, from manufacturing to operation,” they added.
In terms of 3D printing specifically, the sustainability factor can vary depending on the material being extruded, the energy consumed during the process, and where the final product is used.
In the automotive field, 3D-printed parts can help improve fuel efficiency or battery range by reducing weight, compared to traditional parts. They can also deploy more sustainable materials, including recycled materials.
Manufacturers are beginning to pay more attention to the environmental impact of their supply chains, and 3D printing innovators have been paying more attention, too. Printed parts are becoming common in the automotive field as well as concentrating solar systems, wind turbines, bicycle frames, and batteries, among other applications.
Xaba is among the innovators to pay attention. The company takes note of a “need to drive more sustainability in manufacturing by eliminating the waste resulting from human errors, inaccuracies in manufacturing, and by enabling the use of more sustainable materials.”
Xaba’s contribution to the field is a high-precision, industrial robot-enabled 3D system it calls the Xaba Intelligent Machine. The system deploys robots that are commonly used in industry today, enhanced by a patented control system.
“Xaba empowers these smart machines to automatically optimize, adjust, or change manufacturing design flow to address any constraints, which in turn supports manufacturing processes using novel methods and materials,” the company explains.
“It is a configurable commercial control system based on FPGA (field-programmable gate array) technology and incorporates deep learning, while using proprietary data ontology to harness all the meaningful data in the system’s neural network,” Xaba elaborates, referring to the manufacture of integrated circuits that can be configured by a customer.
Let’s also assume they mean ontology as in a system of classification, though the metaphysical alternative would be interesting as well.
Another sustainability aspect of 3D printing is the potential for down-scaling and decentralizing industrial facilities. All else being equal, networks of smaller 3D printing factories could be established within existing buildings or brownfields, rather than destroying greenfields with giga-scale construction projects. The benefits could also include reduced emissions related to shipping and transportation.
The combination of 3D printing and localized production crossed the CleanTechnica radar back in 2015, when the Energy Department’s ARPA-E funding office showcased a 3D-printed electric car under development by the EV startup Local Motors, as part of the Energy Department’s LITECAR (LIghtweighting Technologies Enabling Comprehensive Automotive Redesign) challenge.
CleanTechnica got a look at the printer setup during a trade show, and the whole thing took up the equivalent of a large parking space.
“This unusual auto manufacturer specializes in collaborative open source design, microfactories, and 3D printing, and we took note when the company kicked off 2015 by hooking up with the US Energy Department for a new lightweight design challenge,” we observed.
“What we didn’t note was this other challenge launched by Local Motors, which could put you behind the wheel of a fully customized 3D-printed car some time next year,” we added.
Well, that was a little over-optimistic. By 2019, Local Motors was in position to produce an autonomous electric shuttle called Olli, but the company unexpectedly shut down in January of 2022, as confirmed by the news organization 3D Printing Media.
Despite its demise, Local Motors is credited with showcasing 3D printing for the auto industry, and now Project Arrow is demonstrating a new level of sophistication in the field.
Project Arrow is also demonstrating a deep and growing upswell of interest in electric vehicles throughout the supply chain.
The Automotive Parts Manufacturers’ Association staged a sneak peek of the new electric car at Pfaff Autoworks in Markham, Ontario on December 20, and they also disclosed the Project Arrow supplier list. The roster of several dozen suppliers was winnowed down from a list of more than 200 qualifying Canadian companies, out of 534 companies that originally expressed interest in the project.
Automotive News Canada got the scoop on the supply chain details.
“The vehicle features components from nearly 60 Canadian suppliers,” wrote ANC reporter David Kennedy, “From Quebec wheel manufacturer Fastco Canada, to battery supplier VoltaXplore, a joint venture between Martinrea International Inc. and graphene company NanoXplore.”
“A suite of software companies, such as software bill of materials provider Cybeats Technologies Inc. are also among those represented on the Arrow, which is designed as the first vehicle with ‘complete supply chain transparency,’” Kennedy noted.
In the interests of transparency, the Automotive Parts Manufacturers’ Association also disclosed that just one part was made outside of Canada. The organization searched for a domestic screen supplier and came up empty. They settled on Lenovo, which supplied the screen through a partnership with Ontario Tech University, which is also the primary academic partner for Project Arrow.
Next steps include a two-year global tour after display at CES 2023, with the aim of bringing attention to Canadian auto parts suppliers. According to Kennedy’s reporting, industry stakeholders have also raised the possibility of a production model to follow, so stay tuned for more on that.
Follow me on Trainwreck Twitter @TinaMCasey.
Find me on LinkedIn: @TinaMCasey or Mastodon: @Casey or Post:  @tinamcasey
Photo: Project Arrow EV with fully 3D-printed chassis (courtesy of Project Arrow).
Tina specializes in military and corporate sustainability, advanced technology, emerging materials, biofuels, and water and wastewater issues. Views expressed are her own. Follow her on Twitter @TinaMCasey and Google+.

#1 most loved electric vehicle, solar energy, and battery news & analysis site in the world.

 

Support our work today!

Tesla News Solar News EV News Data Reports
Advertise with CleanTechnica to get your company in front of millions of monthly readers.
Canadian Vehicle Reveals With the recent winter megastorm that rolled in from the arctic, I’m sure many of us probably aren’t excited to think…
Despite a wave of opposition against solar arrays on farmland in the US, solar panels are going to find their way onto farmland one…
How did the Clauses help remote Arctic communities transition to habitat-friendly renewable energy in 2022? 🙂
Canada has adopted rules requiring the sale of zero emissions vehicles that closely follow those crafted by California.
Copyright © 2022 CleanTechnica. The content produced by this site is for entertainment purposes only. Opinions and comments published on this site may not be sanctioned by and do not necessarily represent the views of CleanTechnica, its owners, sponsors, affiliates, or subsidiaries.

source